Back to Top  |
||||
Part # |
Description |
Voltage | RoHS | Spec Sheet(s) |
 B26LSM1-12V |
LED Strip 26 Red |
12V | Yes | |
| B26LSM4-12V |
LED Strip 26 White |
12V | Yes | |
| B26LSM5-12V |
LED Strip 26 Green |
12V | Yes | |
| B26LSM6-12V |
LED Strip 26 Blue |
12V | Yes | |
| B26LSM7-12V |
LED Strip 26 Yellow |
12V | Yes | |
Features:
• The LED light module consists of a maximum of 26 high-brightness PLCC-2 SMD
LEDs mounted on flexible PCB with self-adhesive backing
• Each LED has a 120° viewing angle for even light distribution
• Length of each module can range from 28mm (2 LEDs) to 364mm (26 LEDs)
• Up to 10 full modules (364mm, 260 LEDs) can be connected to one power supply
Application:
• Wiring connections should only be made on the designated soldering pads (marked "+/- 10 or 12V").
Soldering process should not exceed 10 seconds at 260°C.
• Module can be trimmed to the desired length by cutting along the marked line between the
soldering pads.
• The power supply should be connected near the middle of the module strip.
• The power supply should contain an appropriate fuse to insure the electrical current does
not exceed maximum tolerance of the light modules.
• The module should not be exposed to humid or dusty environments. Additional protection
may be necessary for use in harsh conditions.
• The minimum bend radius of the PCB is 2cm. Sharp bends should not be made near an LED
or electronic component.
Accessories: |
|
